Arcade Button sensor manual

From Escape Room Supplier Wiki
Revision as of 07:04, 4 July 2023 by Klaudia (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Arcade Button sensor

General info

If you need a button, you should choose the one with a satisfying arcade-like click.

The maximum load of the feeback connector is 50 mA. If you want to connect something with a higher current load, connect an external power supply - then the maximum load is 1A.

Step 1

Connect the Arcade Button sensor to the Universal puzzle controller via included Ethernet cable.

Step 2

Connect the Universal puzzle controller to a power supply.

Step 3

Whenever the button is pushed, the sensor becomes triggered and its red diode lights up.