Electro-lock output set manual

From Escape Room Supplier Wiki
Revision as of 10:40, 2 February 2022 by Klaudia (talk | contribs)
Electro-lock output set manual

General info

Electro-lock output set is a perfect choice if you need to close something until players solve the puzzle. It comes with a staple you can fix to a surface and make the electro-lock work.

Our electro-lock activates only for 0.5 seconds. It will not heat up, even if you leave the corresponding puzzle solved.

Step 1

Connect the Electro-lock output set to the Universal puzzle controller using the included output relay module and an Ethernet cable.

Step 2

Connect the output set to a power supply. Then, connect the Universal puzzle controller to a power supply.

Step 3

The Electro-lock holds the steel staple until the puzzle is solved. Fix the staple to any surface you want the output set to hold.

Step 4

When the Universal puzzle controller is not solved, the electro-lock holds the metal plate. Once the puzzle is solved, the output set releases the staple.