Lever sensor manual

From Escape Room Supplier Wiki
Revision as of 07:08, 4 July 2023 by Klaudia (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Lever sensor

General info

Make your puzzle interesting with a lever sensor. Let players open a secret door with a satisfying pull or place five levers in a row and prepare a “guess the sequence” puzzle.

The maximum load of the feeback connector is 50 mA. If you want to connect something with a higher current load, connect an external power supply - then the maximum load is 1A.

Step 1

Connect the Lever sensor to the Universal puzzle controller via included Ethernet cable.

Step 2

Connect the Universal puzzle controller to a power supply.

Step 3

Pull the lever to trigger or untrigger the sensor. It becomes triggered and its red diode lights up.