RGB Button sensor manual

From Escape Room Supplier Wiki
Revision as of 08:54, 20 December 2023 by Klaudia (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
RGB Button sensor

General info

RGB Button sensor cycles between colors with every push but only one color is correct. Add colors and the satisfaction of pushing a button to your puzzles!


Step 1

Connect the RGB Button sensor to the Universal puzzle controller via included Ethernet cable.

Step 2

Connect Universal puzzle controller to a power supply.

Step 3

Whenever the button is pushed, it changes its color.

Step 4

Press and hold the teaching button on the sensor’s black control box until the RGB Button sensor blinks one time to set the winning color.

Step 5

From now on, whenever the winning color is chosen, the sensor is triggered.
The order of colors: green, blue, violet, rose, white, red, orange, yellow, no color (off).