3 Fuses Box sensor manual

3 Fuses Box sensor

General info

3 Fuses Box sensor is a simple method to make your players feel like they are electrical engineers. Make them put in or out particular fuses to activate some machine, turn on the lights or open a secret passage!

DO NOT glue a fuse with a fuse head! Doing so stops the fuse from working correctly.

The maximum load of the feeback connector is 50 mA. If you want to connect something with a higher current load, connect an external power supply - then the maximum load is 1A.

Step 1

Connect the 3 Fuses Box sensor to the Universal puzzle controller via included Ethernet cables.

Step 2

Connect the Universal puzzle controller to a power supply.

Step 3

When you screw a fuse in, it becomes triggered and its corresponding red diode lights up.

Step 4

You can use each fuse as a separate sensor. They can be connected to one or multiple Universal puzzle controllers.