Arcade Button sensor manual

From Escape Room Supplier Wiki
Jump to navigation Jump to search
Arcade Button sensor

General info[edit | edit source]

If you need a button, you should choose the one with a satisfying arcade-like click.

The maximum load of the feeback connector is 50 mA. If you want to connect something with a higher current load, connect an external power supply - then the maximum load is 1A.

Step 1[edit | edit source]

Connect the Arcade Button sensor to the Universal puzzle controller via included Ethernet cable.

Step 2[edit | edit source]

Connect the Universal puzzle controller to a power supply.

Step 3[edit | edit source]

Whenever the button is pushed, the sensor becomes triggered and its red diode lights up.