Capacity sensor manual

Capacity sensor

General info

Capacity sensor lets you turn any conductive item into a sensor. Touch a fruit or a metal object to trigger it, surprising players that touching an apple can be a part of a puzzle!

The maximum load of the feeback connector is 50 mA. If you want to connect something with a higher current load, connect an external power supply - then the maximum load is 1A.

Step 1

Connect the Capacity sensor to the Universal puzzle controller via included Ethernet cable.

Step 2

Put the included wire into an item that should trigger the sensor after it’s touched.

Step 3

Connect the Universal puzzle controller to a power supply.

Step 4

If the sensor is constantly triggered, it needs to be calibrated. To do this, unplug the power supply from the Universal puzzle controller, and then plug it again.