Card Reader sensor manual

From Escape Room Supplier Wiki
Card Reader sensor

General info

Card Reader sensor is a ready-to-play working card reader that uses the RFID sensor and cards. Secret agent rooms, ATMs, secure scientific machines – make anything you want with the Card Reader sensor!


The maximum load of the feeback connector is 50 mA. If you want to connect something with a higher current load, connect an external power supply - then the maximum load is 1A.

Step 1

Connect the Card Reader sensor to the Universal puzzle controller via included Ethernet cable.

Step 2

Connect the Universal puzzle controller to a power supply.

Step 3

Whenever you insert the RFID card, the sensor becomes triggered and its red diode lights up.

Step 4

To pair a new RFID card with the sensor, insert that card and press the red button on the RFID sensor.