Circuit Breaker sensor manual

From Escape Room Supplier Wiki
Jump to navigation Jump to search
Circuit Breaker sensor

General info[edit | edit source]

Circuit Breaker sensor makes for a simple switch that looks like an electrical switch from a circuit breaker panel. You can get a couple of them and design a puzzle that powers up the whole room after it is solved.

The maximum load of the feeback connector is 50 mA. If you want to connect something with a higher current load, connect an external power supply - then the maximum load is 1A.

Step 1[edit | edit source]

Connect the Circuit Breaker sensor to the Universal puzzle controller via included Ethernet cable.

Step 2[edit | edit source]

Connect the Universal puzzle controller to a power supply.

Step 3[edit | edit source]

Change the switch position to trigger or untrigger the sensor. It becomes triggered and its red diode lights up.