Escape Room Timer manual

.

ESCAPE ROOM TIMER NEW MANUAL

.

Escape Room Timer

General info

Escape Room Timer not only lets you show the players the remaining time! With the included LED button, players can add the time or stop it at the end of the game and open the last door (or trigger any other output set).

Step 1

If you want to add sensors to the Escape Room Timer (see STEP 4 and 5), connect them to the labeled ports. Then, connect the timer to a power supply.

Step 2

Push the START/STOP button to start or stop the timer. Hold the button for 3 seconds to reset the timer after a game.

Step 3

Push the SET button to choose the duration of the game (10-90 min, in 10-minute intervals). Hold the SET button to program the LED lights (see STEP 7).

Step 4

Escape Room Timer has two ports for sensors. The first one adds 5 minutes to the timer every time it’s triggered (you can use any sensor from our offer).

Step 5

The other port is for the sensor that stops the timer after the game is finished, and it activates the output set connected via its green terminal.

Step 6

You can upload sound effects on the included USB stick to use during the game. To use them, connect speakers to the timer via a minijack cable.

Step 7

If you have the Escape Room Timer with LED lights, connect them to the timer via its green terminal and hold the SET button to set the lights according to your needs.

MODES

MODE 1 – COLOR (one blink)

Set the color of the LEDs with the knob on the Escape Room Timer.

MODE 2 – SATURATION (two blinks)

Set the saturation of the LEDs with the knob on the Escape Room Timer.

MODE 3 – FOLLOW THE PROGRESS (three blinks)

During the game, the LED lights will gradually light up, diode by diode.

MODE 4 – TIME RUNNING OUT (four blinks)

During the game, the LED lights will gradually turn off, diode by diode.