Ignition sensor manual

From Escape Room Supplier Wiki
Ignition sensor

General info

Ignition sensor can be switched on after putting in and turning the key. Make a car-related puzzle or prepare old Russian machinery that is turned on with a key.

The maximum load of the feeback connector is 50 mA. If you want to connect something with a higher current load, connect an external power supply - then the maximum load is 1A.

Step 1

Connect the Ignition sensor to the Universal puzzle controller via included Ethernet cable.

Step 2

Connect the Universal puzzle controller to a power supply.

Step 3

Insert the key into the ignition. Whenever you turn it, the sensor becomes triggered and its red diode lights up.