LED Button sensor manual

From Escape Room Supplier Wiki

General info

LED button sensor is a classic big button that comes in many different colors. You can use it to activate something, make a sequence of a couple of buttons, or as a part of any puzzle you like.

The maximum load of the feeback connector is 50 mA. If you want to connect something with a higher current load, connect an external power supply - then the maximum load is 1A.

Step 1

Connect the LED Button sensor to the Universal puzzle controller via included Ethernet cable.

Step 2

Connect the Universal puzzle controller to a power supply.

Step 3

Whenever the button is pushed, the sensor becomes triggered.