Light Switch sensor manual

From Escape Room Supplier Wiki
Light Switch sensor

General info

Light Switch sensor is a great solution if you need a simple switch. It is modified to work with our Universal puzzle controllers so you can easily use it as a part of any puzzle.

The maximum load of the feeback connector is 50 mA. If you want to connect something with a higher current load, connect an external power supply - then the maximum load is 1A.

Step 1

Connect the Light Switch sensor to the Universal puzzle controller via included Ethernet cable.

Step 2

Connect the Universal puzzle controller to a power supply.

Step 3

Press the light switch to trigger or untrigger the sensor. It becomes triggered and its red diode lights up.