Panic Button sensor manual

From Escape Room Supplier Wiki
Jump to navigation Jump to search
Panic Button sensor

General info[edit | edit source]

Panic Button sensor comes to the rescue in case of emergency – real or fake one. Place it near the final door just in case or use it as a part of a puzzle.

The maximum load of the feeback connector is 50 mA. If you want to connect something with a higher current load, connect an external power supply - then the maximum load is 1A.

Step 1[edit | edit source]

Connect the Panic Button sensor to the Universal puzzle controller via included Ethernet cable.

Step 2[edit | edit source]

Connect the Universal puzzle controller to a power supply.

Step 3[edit | edit source]

Whenever the button is pushed, the sensor becomes triggered and its red diode lights up. To untrigger the sensor, twist the top red part counterclockwise.