Power output set manual

From Escape Room Supplier Wiki
Power output set

General info

Power output set lets you change between two active power outlets through solving a puzzle. In other words, you can turn anything with a power plug into an effect before and after the puzzle is solved.

Step 1

Connect the Power output set to the Universal puzzle controller using the included output relay module and an Ethernet cable.

Step 2

Connect the output set to a power supply and use an additional power supply cable (the Power output set uses two power plugs). Then, connect the Universal puzzle controller to a power supply.

Step 3

When the Universal puzzle controller is not solved, the output set provides power to one power outlet. Once the puzzle is solved, it powers the other outlet.

Step 4

The red diode under the power outlets indicates which one is powered.