Pump output set manual

From Escape Room Supplier Wiki
Jump to navigation Jump to search
Pump output set

General info[edit | edit source]

Pump output set starts pumping liquids when the puzzle is solved. You can use water or any colored liquid (for example, fake blood or magical potions).

Step 1[edit | edit source]

Connect the Pump output set to the Universal puzzle controller using the included output relay module and an Ethernet cable.

Step 2[edit | edit source]

Connect the output set to a power supply. Then, connect the Universal puzzle controller to a power supply.

Step 3[edit | edit source]

Attach tubes to the pump (7 mm width), and prepare some liquid. Do not use acid or corrosive liquids!

Step 4[edit | edit source]

When the Universal puzzle controller is not solved, the pump is not working. Once the puzzle is solved, the output set starts pumping from one tube to the other.