Rotate-to-Unlock sensor manual

Rotate-to-Unlock sensor

General info

Rotate-to-unlock sensor lets you set up the correct position on a rotate module (potentiometer) that triggers the Universal puzzle controller. You can make a puzzle with radio knobs, valves, fake gas stoves, etc.

The maximum load of the feeback connector is 50 mA. If you want to connect something with a higher current load, connect an external power supply - then the maximum load is 1A.

Step 1

Connect the Rotate-to-Unlock sensor to the Universal puzzle controller via included Ethernet cable.

Step 2

Connect the Universal puzzle controller to a power supply.

Step 3

Turn the knob to the desired position and push the teaching button on the sensor. Now the correct position is set.

Step 4

When the knob is in the correct position, the sensor becomes triggered and its red diode lights up.