Rotate-to-Unlock sensor old manual

From Escape Room Supplier Wiki

Step 1

To connect the Rotate-to-Unlock sensor, you have to use the Universal puzzle controller.

Step 2

Plug the Rotate-to-Unlock sensor’s input jack to the Universal. Then, connect the Universal puzzle controller to a power supply.

Step 3

The red diode is off. The Rotate-to-Unlock sensor is not ready yet.

Step 4

Turn the potentiometer to the desired position. Push the red button on the black programming box.

Step 5

Turn the knob to the previously set position. The red diode should be lit. That’s the right position that triggers the sensor.