Small Tripwire sensor manual

From Escape Room Supplier Wiki
Small Tripwire sensor

General info

Small Tripwire sensor lets you create an invisible tripwire that will detect anything that crosses it. This sensor is designed for small spaces, up to 30 cm / 11.8″ in diameter.

The maximum load of the feeback connector is 50 mA. If you want to connect something with a higher current load, connect an external power supply - then the maximum load is 1A.

Step 1

Connect the Small Tripwire sensor to the Universal puzzle controller via included Ethernet cable.

Step 2

Connect the Universal puzzle controller to a power supply.

Step 3

Place both sensor parts on opposite sides on a small opening (max. 30 cm / 11.8 in apart). Line them up so the sensor’s red status diode is turned off.

Step 4

Place both sensor parts on opposite sides on a small opening (max. 30 cm / 11.8 in apart). Line them up so the sensor’s red status diode is turned off.