Storm Lights output set manual

From Escape Room Supplier Wiki
Storm Lights output set

General info

Illuminate a puzzle or your whole Escape Room with randomly blinking Storm Lights. This output set is perfect for creating a lightning cloud or lightning effect outside a window.

Step 1

Connect the Storm Lights output set to the Universal puzzle controller using the included output relay module and an Ethernet cable.

Step 2

Connect the output set to a power supply. Then, connect the Universal puzzle controller to a power supply.

Step 3

When the Universal puzzle controller is not solved, the LED light strip is off. Once the puzzle is solved, the LEDs start to turn on and off randomly, imitating a lightning storm.

Step 4

When the Universal puzzle controller is solved, the LED light strip activates and starts turning on and off randomly. When setting up, you can test the LED light strip by pressing one of two buttons (they will activate a few times).